Durco Mark 3 Pump

Durco Mark III pump


Conforming to ASME (ANSI) B73.1, D Series Mark 3 pumps incorporate many proven reliability- and performance-enhancing features. They are available in a wide range of configurations, including mechanically sealed, dynamically sealed, sealless magnetically driven, low-flow, self-priming and recessed impeller. It provides flexibility and breadth of pumping solutions in countless applications.


Features:

  • Lower total cost of ownership from reverse vane impeller, which eases  maintenance and provides renewable, high-efficiency performance  over the pumps' life

  • Increased reliability and mechanical seal life due to the ideal seal environment seal chamber

  • Ease of maintenance resulting from optimal, predictable seal chamber pressures that are re-established after every impeller setting

  • Extended mechanical seal and bearing life through robust shaft and bearing designs that also minimize shaft deflection

  • Fast and accurate impeller setting with the industry's most innovative external impeller adjustment mechanism

  • In-shop reverse vane impeller adjustment with the only pump that takes full advantage of the back pull-out design

Specification:

ASME B73.1 Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process

  • Flows to 4540 m続/h (20000 gpm)

  • Heads to 215 m (700 ft)

  • Pressures to 27 bar (400 psi)

  • Temperatures from -75 (-100F) to 370 (700F)

Size Range: 

      Sizes from 25 mm (1 in) to 200 mm (8 in)

 

Application:

 

        1. Power

    • Conventional  Steam

    • Combined  Cycle

    • Concentrated  Solar Power (CSP)

    • Biomass & MSW

    • Geothermal


    2. Chemicals

    • Basic (Organic & Inorganic)

    • Specialty (Fine & Consumer)

    • Biofuels

    • Pharmaceutical

    • Petrochemicals



    3. Water

    • Water Management

    • Desalination



    4.  Oil & Gas

    • Upstream Exploration & Production

    • Midstream Transportation

    • Downstream Processing

       

    5. General Industries

    • Pulp &  Paper

    • Mining

    • Food & Beverage

    • Corn Wet  Milling & Ethanol

    • Other  Industries

 

Pump Model List:


1.5x1-62

1.5x1-82

3x1.5-62

3x1.5-82

3x2-62

3x2-82

4x3-82

2x1-10A

3x1.5-10

3x1.5-10A

3x2-10

3x2-10A

4x3-10

4x3-10H

6x4-10

6x4-10H

3x1.5-13

3x2-13

4x3-13

4x3-13HH

6x4-13A

8x6-14A

10x8-16

10x8-16H

6x4-16

8x6-16

8x6-16A



Disclaimer: SUNBO PUMP速 is a registered trademark, and doesn't represent or is not in anyway affiated with Warman速, Metso速 Goulds速, Durco速, and Mission速 and other brand names, all these brand names re respected of their owners. Any names, models, numbers, symbols or any descriptions are used for reference purpose only, and do not imply that any part or pump listed is the product of Warman速, Metso速 Goulds速, Durco速, and Mission速. SUNBO PUMP速 slurry pump and spare parts only interchangeable. This document is the property of SUNBO PUMP, and can be neither reproducted or disclosed to a third party withour a written authorization.

Inquiry Form