8 results found for ‘Slurry Pump Parts’

Metal Slurry pump Parts

Main metal wetted parts are Impeller, Volute, Throat Bush, Frame Plate Liner Insert , Expeller, Expeller Ring... and they are made of high chrome alloy, 27%, SA05,anti-wear, anti-abrasive , ASTM 532,Class III, Type A and long service-life, allowable PH 5-12. According to the different requirement from clients, there are optional materials: SA033, ...

http://http://www.sunbopump.com/Pump-Parts/High-Chrome-Alloy-Parts/Metal-Slurry-pump-Parts-127.html

Slurry Pump Metal Impeller Wear Parts

Impeller is a rotor, rotating component of a centrifugal pump. Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available. It increa ...

http://http://www.sunbopump.com/Pump-Parts/High-Chrome-Alloy-Parts/Slurry-Pump-Metal-Impeller-Wear-Parts-135.html

Slurry Pump Expeller Ring Metal Wear Parts

Sunbo Pump stocks a range of slurry pump parts which have been developed for abrasive applications in mines, quarries, sand and gravel etc, and are used widely across the globe in mineral processing and all other solid mixture applications.  All Sunbo Pump aftermarket slurry pump parts save you money and energy of your slurry pump parts ...

http://http://www.sunbopump.com/Pump-Parts/High-Chrome-Alloy-Parts/Slurry-Pump-Expeller-Ring-Metal-Wear-Parts-136.html

Slurry Pump Volute Liner

A volute Liner is a curved funnel increasing in area to the discharge port. It is often used with impeller pumps. As the area of the cross-section increases, the volute reduces the speed of the liquid and increases the pressure of the liquid. The main purposes of a volute casing is to help balance the hydraulic pressure on the shaft of the pump. Ma ...

http://http://www.sunbopump.com/Pump-Parts/High-Chrome-Alloy-Parts/Slurry-Pump-Volute-Liner-138.html

Slurry Pump Throatbush

Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.   Sunbo Pump stocks a range of slurry pump parts which have been developed for abrasive applications in mines, quarries, sand and gravel etc, and are used widely across the globe in miner ...

http://http://www.sunbopump.com/Pump-Parts/High-Chrome-Alloy-Parts/Slurry-Pump-Throatbush-139.html

Slurry Pump Frame Plate Liner Insert

Impeller is a rotor, rotating component of a centrifugal pump. Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available. It increa ...

http://http://www.sunbopump.com/Pump-Parts/High-Chrome-Alloy-Parts/Slurry-Pump-Frame-Plate-Liner-Insert-140.html

Slurry Pump Bearing Assembly

Bearing assembly--Bearing assembly also called rotor assembly, pump parts assembly. It is a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame. It is an important part of slurry pump and the most important part of d ...

http://http://www.sunbopump.com/Pump-Parts/Bearing-Assembly/Slurry-Pump-Bearing-Assembly-143.html