Capacity (m³/h): 54-289
Head (m): 8.5-40
Speed (r/min): 500-1200
Max. Efficiency η%: 62
Allowable Max. Power (Kw): 75
Standard Submerged Depth (mm): 1200,1500,1800
The vertical centrifugal slurry pumps are no submerged bearings or seals cantilevered pumps, which ideal for a variety of submerged suction pumping applications. These pumps operate well in a variety of sump conditions, submersed in water and sitting on the bottom of the sunp. It can also be readily applied on floating dewatering or other floating pump platforms, to convey high-viscosity slurries with high abrasive, coarse particles. The SVR Vertical Rubber Pumps feature full rubber covering for corrosion resistance.
The sump pump body is bolted to the support plate. The bearing Assembly is designed on the top of the support plate. The physical layout of the submersible sump pump simplifies maintenance operations
Vertical cantilever design eliminates the need of shaft seal or sealing water, the centrifugal sump pump can function property even when there is insufficient slurry getting to the suction side.
The open impeller design has vanes on both sides to balance the centrifugal forces to ensure stable operation. Wide flow passage allows large particle and high viscosity slurries to get through.
The double screen filters are set at the suction side to stop big particles out of the slurry. Protect pump life time.
DC: The motor mounting base is set above the bearing assembly, connect with couplings. It is easyu to install and repair.
BD: A V-belt is used to connect the motor shaft to pump shaft. The motor frame is above the bearing assembly. In this way, it is easy to replace the grooved wheels. The purpose of swapping grooved wheels is to change the rotary speed of the pump to meet different pump working conditions or conform to the worn-down sump pump.