OEM business is a big part of our business. Sunbo accept OEM ODM business as samples or drawings of all kinds of pumps. For special awful working condition, with pointed special material components. Good Quality, Fast Delivery, Strength your competition advantages at local market. We are experienced in anti-abrasion and anti-corrosion material s ...

http://https://www.sunbopump.com/Other-Pump-Parts/OEM-Pump-Parts-Slurry-Pump-Volute-Liner-Impeller-130.html

A volute Liner is a curved funnel increasing in area to the discharge port. It is often used with impeller pumps. As the area of the cross-section increases, the volute reduces the speed of the liquid and increases the pressure of the liquid. The main purposes of a volute casing is to help balance the hydraulic pressure on the shaft of the pump. Ma ...

http://https://www.sunbopump.com/Metal-Parts/Slurry-Pump-Volute-Liner-138.html

The slurry pump impeller play an extremely important role in the operation of centrifugal slurry pump. By rotating, it can help slurry pump meet the needs of the equipment. The slurry pump impeller is easy to be worn out, so we search for the special materials to prolong the lifespan of impeller, high chrome white iron is one of them, aims at ...

http://https://www.sunbopump.com/Metal-Parts/Metal-Impeller-Wear-Parts-268.html

The slurry pump parts consists wet parts, sealing parts, bearing assembly, pedestal and other parts. In slurry pump, Wet Parts means the lining parts which contact with fluid media, usually it includes impeller, volute, frame plate, throat bush. These parts will easily get corroded or abraded when working and should be replaced after a period ...

http://https://www.sunbopump.com/Metal-Parts/Slurry-Pump-Frame-Plate-Liner-Inser-269.html

The Expeller EAM028 is a dynamic component in the slurry pumps with centrifugal seal, which has vanes to reduce the pressure on the shaft. The principle of the expeller seal is that the total pressure produced by the expeller vanes is greater than the pressure generated by the main impeller vanes plus the inlet pressure.       & ...

http://https://www.sunbopump.com/Metal-Parts/Slurry-Pump-Expeller-DAM028-EAM028-Expeller-Ring-DAM029-EAM029-273.html

E4110-A05 Slurry Pump Volute Liner is an important wear part of 6/4D-AH & 6/4E-AH slurry pumps. It forms a slurry pump chamber with throat bush and frame plate liner insert where the slurry would flow through them. Slurry volute Liner is a curved funnel increasing in area to the discharge port. It is often used with slurry pump impeller. As the ...

http://https://www.sunbopump.com/Metal-Parts/Gravel-Pump-Parts-Casing-286.html

300LPT-SHG shield slurry pumpMain applications*Dredging*Gravel conveying*Coarse particle solids handling (Maximum passing particle size: 240 mm)This pump has an approximate weight of 8.7 tons and is normally matched with a 1100 kW drive. The minimum distance required for pump disassembly is 640 mm.Typical replacement parts include the sha ...

http://https://www.sunbopump.com/Gravel-Pump/300LPT-SHG-shield-slurry-pump-306.html

Ceramic slurry pump parts (such as impellers, liners, volute liners, and other flow-passing components) are engineered replacement parts designed for high-wear and high-corrosion applications in mining, metallurgy, chemical, and power industries. These parts feature a high-hardness ceramic working layer bonded to a metal outer shell, delivering sup ...

http://https://www.sunbopump.com/Other-Pump-Parts/Ceramic-slurry-pump-parts-310.html