High Pressure Centrifugal Slurry Pump

HHS series pump is designed for the continuous pumping of highly abrasive, high density slurries with high pressure. It is also called High Head Slurry Pump. The range is capable of handling heavy duty, medium size particles and pumping at heads in excess of 90 meters per stage. The small eye to impeller diameter ratio provides a combination that yields perfect wear performance.

-- High head, high pressure centrifugal end suction slurry pump, long service life.
-- Impeller and liners are made of high chrome alloy, anti-abrasive and wear-resistant.
-- Various types of pump seals to suit different working condition.
-- Discharge branch can be positioned at intervals of 45 degree
-- Can be installed in multi-stage.

-- Size: 1"-6"
-- Capacity: 16-1008 m続/h
-- Head: 25-94 m

Pump Model Selection of HHS Pump
When the type selection is conducted, the performance curve table for clear water of a pump shall be referred to, and the coefficient of range for the flow selected is as follows:
-- For slurry of medium density and strong abrasiveness, the coefficient of flow range will be 40-80%;
-- For slurry of low density and strong abrasiveness, the coefficient of flow range will be 40-100%;
-- For the highest efficiency point under a certain RPM condition, its corresponding flow rate will be 100%.

Disclaimer: SUNBO PUMP速 is a registered trademark, and doesn't represent or is not in anyway affiated with Warman速, Metso速 Goulds速, Durco速, and Mission速 and other brand names, all these brand names re respected of their owners. Any names, models, numbers, symbols or any descriptions are used for reference purpose only, and do not imply that any part or pump listed is the product of Warman速, Metso速 Goulds速, Durco速, and Mission速. SUNBO PUMP速 slurry pump and spare parts only interchangeable. This document is the property of SUNBO PUMP, and can be neither reproducted or disclosed to a third party withour a written authorization.

Inquiry Form