Slurry Pump Volute Liner

A volute Liner is a curved funnel increasing in area to the discharge port. It is often used with impeller pumps. As the area of the cross-section increases, the volute reduces the speed of the liquid and increases the pressure of the liquid. The main purposes of a volute casing is to help balance the hydraulic pressure on the shaft of the pump. Materials are SA05, SA49, SA33, Natural Rubber , Polyurethane...etc, to meet different working duty.

Sunbo Pump stocks a range of slurry pump parts which have been developed for abrasive applications in mines, quarries, sand and gravel etc, and are used widely across the globe in mineral processing and all other solid mixture applications.

 

All Sunbo Pump aftermarket slurry pump parts save you money and energy of your slurry pump parts requirement. We can offer superior pump components that last longer, thus requiring less maintenance and change-outs as well as optional designs that allow you to maximize your budget in your original equipments maintenance.

 

Our horizontal slurry pump parts and vertical sump pump spare parts are dimensionally interchangeable with warman slurry pump parts and other brand slurry pumps. And more, we accept pump parts OEM and ODM business, especially abrasion and corrosion pump parts. We have our own foundry and compound specialist to increase the wet parts wear life time, and they have been tested by end users plant of the most abrasive and most corrosive arduously applications. We also welcome the opportunity to discuss your applications in more detail. Our experienced technical engineers are always ready to give advice and make suggestions to improve future wear life of your slurry pumps. We are capable enough to help you work out a perfect casting material ingredient for your special slurries.

 

Main Applications: Heavy Mining | Mineral Processing | Sand and Gravel |Coal Prep | Cyclone Feeds | Aggregate Processing | Fine Primary Mill Grinding | Chemical Slurry Service | Tailings | Secondary Grinding | Industrial Processing | Pulp And Paper | Food Processing | Cracking Operations | Ash Handling | Pipeline Transport | High Velocity Hydraulic Transport |Food Processing | Explosive Sludge In Metal Smelting | River And Pond Dredging | Heavy Refuse Removal | Larger Particle Or Low NPSHA Applications | Continuous (Snore) Sump Pump Operation | Abrasive Slurries | High Density Slurries | Large Particle Slurries | Sump Drainage | Wash down | Floor Drainage | Mixing | Iron Ore | Cooper | Diamond | Alumina | Coal | Gold | Kaolin | Phosphorite | Steel | Palm | Suger | Chemical | Power | FGD | Frac Sand Blending | Construction | City Sewage | etc.


Volute Liner Parts Code


Volute Liner Sunbo Pump Model Replacement Warman Slurry Pump Model
S B1110 25HS-B 1.5/1B-AH
S B15110 40HS-B 2/1.5B-AH
S C2110 50HS-C 3/2C-AH
S D3110 75HS-C, 75HS-D 4/3C-AH, 4/3D-AH
S E4110 100HS-D, 100HS-E 6/4D-AH, 6/4E-AH
S F6110 150HS-E, 150HS-F 8/6 E-AH, 8/6 F-AH
S G8110 200HS-F, 200HS-ST 10/8 F-AH, 10/8 ST-AH
S G10110 250HS-F, 250HS-ST 12/10 F-AH, 12/10 ST-AH
S G12110 300HS-F, 200HS-ST 14/12 F-AH, 14/12 ST-AH
S H14110 350HS-TU 16/14TU-AH
S AL2110 20A-SL 20A-L
S BL5110 50B-SL 50 B-L
S CL75110 75C-SL 75 C-L
S DL10110 100D-SL 100 D-L
S EL15110 150E-SL 150 E-L
S F8110 200MS-E,200MS-F.200MS-R 10/8 E-M, 10/8 F-M,10/8R-M
S F10110 250MS-E, 250MS-F 12/10 E-M, 12/10 F-M
S SL30110 300S-SL 300 S-L
S CH1110 25HHS-C 1.5/1 C-HH
S DH2110 50HHS-D 3/2 D-HH
S EH3110 75HHS-E 4/3 E-HH
S FH4110 100HHS-F 6/4 F-HH
S FH4110 150HHS-S 6S-H
S FP6110 150AHPS-S 8/6 S-AHP

Sunbo material Speciification


Honstar Material Code Material Name Applications
Abrasion Resistant Alloy
SA04 High Chromium 24% Cr Impeller, Liners, Stuffing Box, Expeller Ring, Expeller, etc.
SA05 High Chromium 27% Cr Impeller, Liners, Expeller Ring, Expeller, etc.
SA06 Ni-Hard 4 Impeller, Liners, etc.
SA07 15/3 Cr-Mo Alloy Impeller, Liners, etc.
SA12 High Chromium 30% Cr Impeller, Liners, etc.
SA25 Ni-Cr-Mo Alloy Impeller, Liners, etc.
SA49 28% Cr, Low C Impeller, Liners, etc.
SA51 36% Cr, Low C Impeller, Liners, etc.
Corrosion Resistant Alloy
SC21 13% Chromium Steel Shaft Sleeve, Shaft Spacer, etc.
SC22 304 Stainless Steel Impeller, Liners, Shaft Sleeve, Stuffing Box, Expeller Ring, Expeller, Bolt, etc.
SC23 316 Stainless Steel Impeller, Liners, Shaft Sleeve, Stuffing Box, Expeller Ring, Expeller, Bolt, etc.
SC25 Alloy 20 Impeller, Liners, Shaft Sleeve, Stuffing Box, Expeller Ring, Expeller, etc.
SC26 CD-4MCu Impeller, Liners, Shaft Sleeve, Stuffing Box, Expeller Ring, Expeller, etc.
Ductile Iron
SD21 Grade 500-7 Cover Plate, Frame Plate, Base, Bearing Housing, Stuffing Box, etc.
Engineering Steel
SE02 Grade 250 Structural Steel Bolts, etc.
SE05 K1045 Carbon Steel Shaft, Bolts, etc.
Grey Iron
SG01 Grade T200 Cover Plate, Frame Plate, Base, Bearing Housing, Stuffing Box, Expeller Ring, Expeller, etc.
SG02 Grade T260 Cover Plate, Frame Plate, Base, Bearing Housing, Stuffing Box, Expeller Ring, Expeller, etc.
SG03 Grade T300 Cover Plate, Frame Plate, Base, Bearing Housing, Stuffing Box, Expeller Ring, Expeller, etc.
Natural Rubber
SR55 Polyisoprene Impeller, Liners, Expeller Ring, Expeller, etc.
SR33 Polyisoprene Impeller, Liners, Expeller Ring, Expeller, etc.
SR26 Polyisoprene Impeller, Liners, Expeller Ring, Expeller, etc.
SR08 Polyisoprene Impeller, Liners, Expeller Ring, Expeller, etc.
Polyurethane
SU01 Polyurethane Impeller, Front Liner, Back Liner, FPL, Throatbush, etc.
Plastic
SP50 Polyphenylene Sulphide Lantern Ring, Lantern Restrictor
Synthetic Rubber
SS01 EPDM Rubber Seals, etc.
SS10 Nitrile Rubber Seals, etc.
SS31 Chlorosulfonated Polyethylene Impeller, Liners, Expeller Ring, Expeller, etc.
(HYPALON)

Quality Control


All our production processes are striclty follow ISO 9001:2015 standard, and every below centrifugal pump production step rules are rigorously carried out by Sunbo People.When quality counts...count on SUNBO.

Stages of Manufacture Quality Control Activities Specification
Raw material arrival Sampling, material chemical analysis NPB121.1-29-1997
Casting and composition Material material chemical analysis of pump parts NPB121.1-29-1997
Casting quality inspection NPB302-1998
Key component machining Dimension precision inspection NPB2105-87
Impeller balancing NPB061-2000
General assembly Procedure operation NPB2103-96
Hydraulic static test NPB064-1998
Performance test of pump unit Capacity and head NPB157-1997
Vibration and noise JB/T8097-95
Bearing temperature JB/T5295-91
Final inspection Packaging of pump unit NPB0157-1997
Documents NPB0157-1997
Spare parts and accessories NPB0157-1997

 


Disclaimer: SUNBO PUMP速 is a registered trademark, and doesn't represent or is not in anyway affiated with Warman速, Metso速 Goulds速, Durco速, and Mission速 and other brand names, all these brand names re respected of their owners. Any names, models, numbers, symbols or any descriptions are used for reference purpose only, and do not imply that any part or pump listed is the product of Warman速, Metso速 Goulds速, Durco速, and Mission速. SUNBO PUMP速 slurry pump and spare parts only interchangeable. This document is the property of SUNBO PUMP, and can be neither reproducted or disclosed to a third party withour a written authorization.

Inquiry Form