36 results found for ‘Centrifugal pump’

HS HHS SL MS Series Slurry Pumps

The HS series pumps are designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements, the horizontal centrifugal pumps will maintain high efficiencies over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing ...

http://http://www.sunbopump.com/Slurry-Pumps/Slurry-Pump/HS-HHS-SL-MS-Series-Slurry-Pumps-120.html

SG Horizontal Centrifugal Gravel Pump

The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further i ...

http://http://www.sunbopump.com/Slurry-Pumps/Gravel-Pump/SG-Horizontal-Centrifugal-Gravel-Pump-124.html

FGD Slurry Pump

FGD pump is single stage, single suction horizontal centrifugal pump. It is mainly used as the circulating pump for absorption tower in FGD system in Power Plant. The wet parts are designed with the CFD Fluid Simulating Analysis Technology to ensure its high-efficiency operation. The position of impeller in the pump internal can be changed by adjus ...

http://http://www.sunbopump.com/Slurry-Pumps/FGD-Pump/FGD-Slurry-Pump-126.html

Slurry Pump Rubber Impeller

The rubber wet parts are great wear resistance and corrosion resistance, usually used for acid working conditions. Such as tailing in mining industry, slurry with small particles and no rough edges. The whole displacement part includes Cover Plate Liner, Throat bushing, Frame plate liner, Frame Plate Liner Insert. The rubber spare parts are made of ...

http://http://www.sunbopump.com/Pump-Parts/Rubber-Parts/Slurry-Pump-Rubber-Impeller-132.html

Rubber Back Liner Wear Parts

The rubber wet parts are great wear resistance and corrosion resistance, usually used for acid working conditions. Such as tailing in mining industry, slurry with small particles and no rough edges. The whole displacement part includes Cover Plate Liner, Throat bushing, Frame plate liner, Frame Plate Liner Insert. The rubber spare parts are made of ...

http://http://www.sunbopump.com/Pump-Parts/Rubber-Parts/Rubber-Back-Liner-Wear-Parts-133.html

Pump Rubber Front Liner Wear Parts

The rubber wet parts are great wear resistance and corrosion resistance, usually used for acid working conditions. Such as tailing in mining industry, slurry with small particles and no rough edges. The whole displacement part includes Cover Plate Liner, Throat bushing, Frame plate liner, Frame Plate Liner Insert. The rubber spare parts are made of ...

http://http://www.sunbopump.com/Pump-Parts/Rubber-Parts/Pump-Rubber-Front-Liner-Wear-Parts-134.html

Slurry Pump Metal Impeller Wear Parts

Impeller is a rotor, rotating component of a centrifugal pump. Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available. It increa ...

http://http://www.sunbopump.com/Pump-Parts/High-Chrome-Alloy-Parts/Slurry-Pump-Metal-Impeller-Wear-Parts-135.html

Slurry Pump Expeller Ring Metal Wear Parts

Sunbo Pump stocks a range of slurry pump parts which have been developed for abrasive applications in mines, quarries, sand and gravel etc, and are used widely across the globe in mineral processing and all other solid mixture applications.  All Sunbo Pump aftermarket slurry pump parts save you money and energy of your slurry pump parts ...

http://http://www.sunbopump.com/Pump-Parts/High-Chrome-Alloy-Parts/Slurry-Pump-Expeller-Ring-Metal-Wear-Parts-136.html

Slurry Pump Volute Liner

A volute Liner is a curved funnel increasing in area to the discharge port. It is often used with impeller pumps. As the area of the cross-section increases, the volute reduces the speed of the liquid and increases the pressure of the liquid. The main purposes of a volute casing is to help balance the hydraulic pressure on the shaft of the pump. Ma ...

http://http://www.sunbopump.com/Pump-Parts/High-Chrome-Alloy-Parts/Slurry-Pump-Volute-Liner-138.html

Slurry Pump Throatbush

Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.   Sunbo Pump stocks a range of slurry pump parts which have been developed for abrasive applications in mines, quarries, sand and gravel etc, and are used widely across the globe in miner ...

http://http://www.sunbopump.com/Pump-Parts/High-Chrome-Alloy-Parts/Slurry-Pump-Throatbush-139.html

Slurry Pump Frame Plate Liner Insert

Impeller is a rotor, rotating component of a centrifugal pump. Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available. It increa ...

http://http://www.sunbopump.com/Pump-Parts/High-Chrome-Alloy-Parts/Slurry-Pump-Frame-Plate-Liner-Insert-140.html

Slurry Pump Rubber Throat Bush

The rubber wet parts are great wear resistance and corrosion resistance, usually used for acid working conditions. Such as tailing in mining industry, slurry with small particles and no rough edges. The whole displacement part includes Cover Plate Liner, Throat bushing, Frame plate liner, Frame Plate Liner Insert. The rubber spare parts are made of ...

http://http://www.sunbopump.com/Pump-Parts/Rubber-Parts/Slurry-Pump-Rubber-Throat-Bush-142.html

Metal Lined Slurry Pumps

The HS series pumps are designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements, the horizontal centrifugal pumps will maintain high efficiencies over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing ...

http://http://www.sunbopump.com/Slurry-Pumps/Slurry-Pump/Metal-Lined-Slurry-Pumps-148.html

150E-SG Model Gravel Sand Pump

Specification: Capacity (m3/h): 126-576 Head (m): 6-45 Speed (r/min): 800-1400 Max. Efficiency N-n%: 60 NPSH (m): 3-4.5 Allowable Max. Power (Kw): 120   Description: The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of ...

http://http://www.sunbopump.com/Slurry-Pumps/Gravel-Pump/150E-SG-Model-Gravel-Sand-Pump-155.html

250G-SG Model Rive Sand Gravel Pump

  Specification: Capacity (m3/h): 360-1440 Head (m): 10-60 Speed (r/min): 400-850 Max. Efficiency N-n%: 65 NPSH (m): 1.5-4.5 Allowable Max. Power (Kw): 600   Description: The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. ...

http://http://www.sunbopump.com/Slurry-Pumps/Gravel-Pump/250G-SG-Model-Rive-Sand-Gravel-Pump-157.html

300TU-SG Model High Pressure Gravel Pump

Specification: Capacity (m3/h): 720-3600 Head (m): 18-44 Speed (r/min): 300-500 Max. Efficiency N-n%: 70 NPSH (m): 3-9 Allowable Max. Power (Kw): 600   Description: The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of h ...

http://http://www.sunbopump.com/Slurry-Pumps/Gravel-Pump/300TU-SG-Model-High-Pressure-Gravel-Pump-158.html

350TU-SG Model Sand Gravel Pump

Specification: Capacity (m3/h): 324-3600 Head (m): 26-70 Speed (r/min): 300-500 Max. Efficiency N-n%: 72 NPSH (m): 3-6 Allowable Max. Power (Kw): 1200   Description: The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of ...

http://http://www.sunbopump.com/Slurry-Pumps/Gravel-Pump/350TU-SG-Model-Sand-Gravel-Pump-159.html

75HS-C model high quality Slurry Pump

  Specification: Capacity (m3/h): 86.4-198 Head (m): 9-52 Speed (r/min): 1000-2200 Max. Efficiency  N-n%: 71 NPSH (m): 4-6 Allowable Max. Power (Kw):  30     Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. It is designed for the continu ...

http://http://www.sunbopump.com/Slurry-Pumps/Slurry-Pump/75HS-C-model-high-quality-Slurry-Pump-165.html

100HS-D Model Centrifugal Slurry Pump

Specification Capacity (m3/h): 162-360 Head (m): 12-56 Speed (r/min): 800-1550 Max. Efficiency N-n%: 65 NPSH (m): 5-8 Allowable Max. Power (Kw): 60   Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. It is designed for the continuous pumping of highly abrasive ...

http://http://www.sunbopump.com/Slurry-Pumps/Slurry-Pump/100HS-D-Model-Centrifugal-Slurry-Pump-166.html

50HHS-C High Head Slurry Pump

  Specification: Capacity (m3/h): 68.4-136.8Head (m): 25-87Speed (r/min): 850-1400Max. Efficiency N-n%: 47NPSH (m): 3-7.5Allowable Max. Power (Kw): 60   HHS series pump is designed for the continuous pumping of highly abrasive, high density slurries with high pressure. It is also called High Head Slurry Pump. The range is capable of h ...

http://http://www.sunbopump.com/Slurry-Pumps/Slurry-Pump/50HHS-C-High-Head-Slurry-Pump-183.html

100HHS-F High Pressure Slurry Pump

  Specification: Capacity (m3/h): 324-720Head (m): 30-118Speed (r/min): 600-1000Max. Efficiency N-n%: 64NPSH (m): 3-8Allowable Max. Power (Kw): 260  HHS series pump is designed for the continuous pumping of highly abrasive, high density slurries with high pressure. It is also called High Head Slurry Pump. The range is capable of handli ...

http://http://www.sunbopump.com/Slurry-Pumps/Slurry-Pump/100HHS-F-High-Pressure-Slurry-Pump-184.html

SM Series Drilling Mud Slurry Pump

MagnumSM series mud centrifugal pumps are mainly design for solids control circulating system of oilfield drill rig. It can be used to provide drilling liquid with a certain discharge capacity and pressure to sand, desilter and mud mixer, to assure these equipments work efficiently. Features:1. Open impeller design, ideally dealing high viscosity ...

http://http://www.sunbopump.com/Slurry-Pumps/Mud-Pump/SM-Series-Drilling-Mud-Slurry-Pump-185.html

3x2x13 Drilling Mud Centrifugal Pump

MagnumSM series mud centrifugal pumps are mainly design for solids control circulating system of oilfield drill rig. It can be used to provide drilling liquid with a certain discharge capacity and pressure to sand, desilter and mud mixer, to assure these equipments work efficiently. Features:1. Open impeller design, ideally dealing high viscosity ...

http://http://www.sunbopump.com/Slurry-Pumps/Mud-Pump/3x2x13-Drilling-Mud-Centrifugal-Pump-187.html

6x5x11 Desilter Pump

MagnumSM series mud centrifugal pumps are mainly design for solids control circulating system of oilfield drill rig. It can be used to provide drilling liquid with a certain discharge capacity and pressure to sand, desilter and mud mixer, to assure these equipments work efficiently. Features:1. Open impeller design, ideally dealing high viscosity ...

http://http://www.sunbopump.com/Slurry-Pumps/Mud-Pump/6x5x11-Desilter-Pump-188.html

8x6x14 Oil Feild Centrifugal Pump

Sand Pump SSA series centrifugal sand pump is designed for continuous operation of heavy slurries that are abrasive, corrosive, or just plain tough to pump. SSA Series Pump are more compact in design, and it can be adaptted for hydraulic motor drive. It is mainly used for oilfield frac trucks as well as blending and pump dealing for water well dri ...

http://http://www.sunbopump.com/Slurry-Pumps/Mud-Pump/8x6x14-Oil-Feild-Centrifugal-Pump-189.html

4x3x13 Drilling Sand Pump

MagnumSM series mud centrifugal pumps are mainly design for solids control circulating system of oilfield drill rig. It can be used to provide drilling liquid with a certain discharge capacity and pressure to sand, desilter and mud mixer, to assure these equipments work efficiently. Features:1. Open impeller design, ideally dealing high viscosity ...

http://http://www.sunbopump.com/Slurry-Pumps/Mud-Pump/4x3x13-Drilling-Sand-Pump-191.html

Drilling Sand Pump Spare Parts

The SM series mud centrifugal pumps are similar with the SSA series pumps. All the spare parts are interchangeable, except the Frame Support and Shaft, 4 differences in length. The pump main spare parts are Pump Casing, Impeller, Bearing Block, Pump Axle, Bearing, Shaft Coupling, Wearing Plate, Seal Apparatus, OilS seal, Bolts , Nuts, Motor and Bas ...

http://http://www.sunbopump.com/Slurry-Pumps/Mud-Pump/Drilling-Sand-Pump-Spare-Parts-193.html